Skip to content Skip to main menu
Products

We produce high-strength, high-corrosion-resistant aluminum plates
through precise processing technology and thorough quality control.

Main Products

1

Products

We are committed to continuous effort and development to supply high-quality products of various alloys, focusing on aluminum A6061-T6/T651 plates.

ALLOY Main alloy Thickness(mm) Standard size(W x L , mm) Industries
A1XXX
(Non-heat treatable alloy)		 A1050
A1060
A1070		 0.2 ~ 500 1,219 x 2,438
1,250 x 2,500
1,524 x 3,048		 Building materials, Vehicle materials
Ship structural components
Battery case, Fuel tank
Household appliances
A2XXX
(Heat treatable alloy)		 A2017
A2024
A2124		 3 ~ 500 1,250 x 2,500
1,500 x 3,000		 General industrial machinery parts
Aircraft materials, Structural materials
Various mold materials
A3XXX
(Non-heat treatable alloy)		 A3003 0.2 ~ 500 1,219 x 2,438
1,250 x 2,500
1,524 x 3,048		 건축용재, 차량용재
선박용 구조 부품재
배터리 CASE, 연료탱크
가정용 기구
A5XXX
(Non-heat treatable alloy)		 A5005
A5052
A5083
A5754		 0.2 ~ 600 1,219 x 2,438
1,250 x 2,500
1,524 x 3,048
A6XXX
(Heat treatable alloy)		 A6061
A6082		 0.8 ~ 500 1,250 x 2,500(5,000)
1,350 x 2,500(5,000)
1,524 x 2,500(5,000)
1,600 x 2,500(5,000)		 Semiconductor/Display equipment materials
General industrial machinery parts
Aircraft materials, Structural materials
Various mold materials
A7XXX
(Heat treatable alloy)		 A7050
A7075		 3 ~ 500 1,250 x 2,500
1,500 x 3,000
NOTE: Custom specifications are available in addition to the above standard specifications. (Maximum width 4,000mm available)
2

Chemical Composition

ALLOY Si Fe Cu Mn Mg Cr Zn Ti Others AL Main Applications
A1050
(Pure Al)		 ~0.25 ~0.4 ~0.05 ~0.05 ~0.05 ~0.05 ~0.03 99.5~ Electric wire, Chemical equipment, Utensils, Printing plate
A5052
(Al-Mg)		 ~0.25 ~0.4 ~0.1 ~0.1 2.2~2.8 2.2~2.8 ~0.1 ~0.15 Remainder Building, Machinery, Door materials, Shipbuilding
Various mold materials
A5083
(Al-Mg)		 ~0.4 ~0.4 0.4~1.0 0.4~1.0 4.0~4.9 4.0~4.9 ~0.25 ~0.15 ~0.15 Remainder Shipbuilding and exterior materials, Vehicles, Machinery, Building
Low-temperature tanks, Pressure vessels, etc.
A6061
(Al-Mg-Si)		 0.4~0.8 ~0.7 0.15~0.4 ~0.15 0.8~1.2 0.8~1.2 ~0.25 ~0.15 ~0.15 Remainder Vehicles, Semiconductor, LCD,
Display, etc.
A7075
(Al-Zn-Mg)		 ~0.4 ~0.5 1.2~2.0 ~0.3 2.1~2.9 2.1~2.9 5.1~6.1 ~0.15 ~0.15 Remainder High-strength structural materials, Aircraft materials
Various mold materials
NOTE: EN 573-3 & ASTM B 209, AS, KS D 6701
3

Mechanical Properties

ALLOY Temper Thickness Tensile Strength (Mpa) Yield Strength (Mpa) Elongation (%) Hardness (HB)
A1050
A5052 H32 226 191 12 60
O 191 88 25 47
A5083 O/H112 289 147
A6061 F 123 54 25 30
T4 240 147 22 65
T6 0.4~100 290 240 5~10 95
101~400 260~275 220~230 2~5 95
T651 0.4~100 290 240 5~10 95
101~400 260~275 220~230 2~5
A7075 T651 574 506 11 150
NOTE: EN 485-2 & ASTM B 209, AS, KS D 6701